SIVACON 8PS TRUNKING SYSTEMS
BD2 system
data transmission with powerline technology
Safe operation and reliable fire protection
The BD2 system is particularly suited for applications from 160 A to 1,250 A with increased safety requirements. The tested fire barrier and functional endurance in case of fire ensure a high level of safety – and thus represent an optimum solution for large buildings and industrial applications, as well as for shipbuilding. The compact system not only stands out for its safe operating behaviour, but also for its minimum space requirements. It can also be used for the infeed of the smaller
BD01 system.
Easy and quick installation with access protection
The anti-rotation feature and guided installa- tion increase safety during the installation
of the system. The joint block, which includes a single-bolt terminal, permits simple and quick installation with integrated expansion compensation.
Sealable tap-off points protect against unauthorised access. In addition, numerous components such as 3D junction units permit a flexible adaptation to the building structure in question.
Increased transparency
of operation thanks to communication capability
The communication-capable BD2 busbar trunking system with its load detection, remote monitoring and switching, as well as with its lighting control, increases system availability, ensuring greater transparency in your operation. Thanks to the powerline technology of the BD2 system, power and data are transmitted cost-efficiently via the current conductors.
Junction unit for optimum adaptation to building structures
Individually equipped tap-off units up to 530 A can be plugged on/off while energised
Tap-off unit with powerline technology
Technical data
Busbar coating | 19 | |||||||
Insulation | 18 | |||||||
Mounting Position | 17 | |||||||
Standards | IEC 61439-1/-6 | 16 | ||||||
Housing material | Galvanised and painted sheet steel | 15 | ||||||
Conductor material | Aluminium or copper | 14 | ||||||
Connection technology | With integrated expansion compensation, single-bolt terminal | 13 | ||||||
Data transmission | Powerline, data cable
With integrated expansion compensation, single-bolt terminal | 12 | ||||||
Tap-off unit | Up to 530 A | 11 | ||||||
Tap-off point | Every 0.5 m on one side, offset on both sides every 0.25 m | 10 | ||||||
Fire load (per tap-off point) | - | 9 | ||||||
Fire load | Max. 2.0 kWh/m | 8 | ||||||
Number of conductors | 5 | 7 | ||||||
Rated short-time withstand current Icw (1s) | Up to 34 kA | 6 | ||||||
Rated peak withstand current Ipk | Up to 90 kA | 5 | ||||||
Rated current InA | 160 A to 1,250 A | 4 | ||||||
Degree of protection | IP52, IP55 | 3 | ||||||
Rated operational voltage Ue | 690 V AC | 2 | ||||||
Rated insulation voltage Ui | 690 V AC | 1 |
Your benefit
-
Flexibility by two sizes
up to 1,250 A in seven current ratings with aluminium or copper conductors -
Protection against unauthorised access through sealable tap-off points
-
Flexible adaptation to every building structure by means of 3D junction units up to 800 A
-
High level of safety in the case of fire by tested fire barrier and functional endurance
-
Low space requirements
-
Cost-efficient data transmission with power-line technology